Manual:String Functions

From Mudlet
(Redirected from Template:String Functions)
Jump to navigation Jump to search

String Functions

A collection of functions used to manipulate strings.

addWordToDictionary

addWordToDictionary(word)
Adds the given word to the custom profile or shared dictionary (whichever is selected in preferences).
Returns true on success (the word was actually added to the dictionary by this call) and nil+msg on error - including if the word was already there - this is so that if you have other scripts that you wish to run when a word was added you can make their execution conditional on success here.
See also: removeWordFromDictionary()
Parameters
  • word: custom word to add to the dictionary.
Mudlet VersionAvailable in Mudlet3.18+
Example
addWordToDictionary("Darkwind")
addWordToDictionary("黑暗的风")
addWordToDictionary("норм")
Example - function making use of return value
function rememberPlayerName(name)
  if addWordToDictionary(name) then
    echo("Added '" .. name .. "' to dictionary...\n")
  end
end

cecho2string

plainText = cecho2string(formattedText)
Strips the text formatting from the string passed in, leaving behind only the text.
See also
ansi2string(), hecho2string()
Mudlet VersionAvailable in Mudlet4.15+
Parameters
  • formattedText:
The string you want to strip the formatting codes from
Returns
  • The string with the formatting codes stripped out.
Example
local exampleString = "<red>Formatted <b>string</b>"
local plainText = cecho2string(exampleString)
-- "Formatted string"

decho2string

plainText = decho2string(formattedText)
Strips the text formatting from the string passed in, leaving behind only the text.
See also
ansi2string(), cecho2string()
Mudlet VersionAvailable in Mudlet4.15+
Parameters
  • formattedText:
The string you want to strip the formatting codes from
Returns
  • The string with the formatting codes stripped out.
Example
local exampleString = "<255,0,0>Formatted <b>string</b>"
local plainText = decho2string(exampleString)
-- "Formatted string"

f

formattedString = f(str)
Allows you to combine variables and functions into text (string interpolation) using {}.
Parameters
  • str:
The string to perform interpolation against.
Mudlet VersionAvailable in Mudlet4.11+

Note Note: Using f is slower than using concatenation with the '..' operator by a fair bit, due to the way it has to gather scope for supporting local variables. For aliases or single calls this isn't so bad, but if you're looping a large table and building a string then f's slowness will really start to show and bring performance down.

Example
-- old way:
cecho("\nHello, "..matches[2]..", how is it going?")

-- new way:
cecho(f("\nHello {matches[2]}, how is it going?"))
testResult = "successful"
-- old way:
echo("The test was "..testResult.."\n")
-- with f:
echo(f("The test was {testResult}\n"))
-- echoes "The test was successful\n"

local testResult = "a failure"
echo(f("The test was {testResult}\n"))
-- echoes "The test was a failure\n" as it sees the local scope over global.
-- You can also execute simple expressions
echo(f("2 + 2 = {2 + 2}\n"))
-- echoes "2 + 2 = 4\n"

-- Or more complicated ones
local function testFunc(item)
  return item:title()
end

echo(f("You should properly capitalize names, such as {testFunc('marilyn')}\n"))
-- echoes "You should properly capitalize names, such as Marilyn\n"

echo(f("You should properly capitalize names, such as {string.title('robert')}\n")
-- same thing, but uses string.title directly and Robert instead of Marilyn


Caution! When using within closures, might not resolve variables correctly if they go out of a scope when closure is called.

function formatter2000()
  local upvalue = "2000"
  local formatter = function() 
    echo(f("Let's evaluate: {upvalue}\n"))
  end
  formatter() -- here evaulation inside f function will work
  return formatter
end

formatter2000()() -- here evaluation inside f function will return nil
-- result
-- Let's evaluate: 2000
-- Let's evaulate: nil

You can work around this by doing the following

function formatter2000()
  local upvalue = "2000"
  local formatter = function()
    local upvalue = upvalue  -- this keeps upvalue in scope for the function later
    echo(f("Let's evaluate: {upvalue}\n"))
  end
  formatter() -- here evaulation inside f function will work
  return formatter
end

formatter2000()() -- here evaluation inside f function will return 2000 once again

-- result
-- Let's evaluate: 2000
-- Let's evaulate: 2000

getDictionaryWordList

getDictionaryWordList()
Returns the profile or shared custom dictionary word list (whichever is selected in preferences) - that is, words added via right-click "add word to dictionary" or addWordToDictionary().
Returns an indexed table of words.
Mudlet VersionAvailable in Mudlet3.18+
Example
display(getDictionaryWordList())

hecho2string

plainText = hecho2string(formattedText)
Strips the text formatting from the string passed in, leaving behind only the text.
See also
ansi2string(), decho2string()
Mudlet VersionAvailable in Mudlet4.15+
Parameters
  • formattedText:
The string you want to strip the formatting codes from
Returns
  • The string with the formatting codes stripped out.
Example
local exampleString = "#ff0000Formatted #bstring#/b"
local plainText = cecho2string(exampleString)
-- "Formatted string"

removeWordFromDictionary

removeWordFromDictionary(word)
Removed the given word to the custom profile or shared dictionary (whichever is selected in preferences).
Returns true on success (if the word was present and removed by this call) and nil+msg on error.
See also: addWordToDictionary()
Parameters
  • word: custom word to remove from the dictionary.
Mudlet VersionAvailable in Mudlet3.18+
Example
removeWordFromDictionary("Darkwind")
removeWordFromDictionary("黑暗的风")
removeWordFromDictionary("норм")

spellCheckWord

spellCheckWord(word, [customDictionary])
Spellchecks the given word against the custom or the system dictionary.
Returns true if the word is spelled correctly or false if it's not, and nil+msg on error.
See also: addWordToDictionary(), removeWordFromDictionary(), spellSuggestWord()
Parameters
  • word: word to spellcheck.
  • customDictionary (optional): dictionary to use. If true, the profile or shared dictionary will be used (depending on your settings). If omitted or false, the system dictionary (the language you have selected in settings) will be used.
Mudlet VersionAvailable in Mudlet3.18+
Example
-- spellcheck against the language dictionary
if spellCheckWord("run") then
  echo("'run' is spelled ok!\n")
end

-- spellcheck against the custom 'add word to dictionary'
if spellCheckWord("Darkwind", true) then
  echo("'Darkwind' is spelled OK!\n")
end

spellSuggestWord

spellSuggestWord(word, [customDictionary])
Suggests similar words for the given word.
Returns a table of suggestions or nil+msg on error.
See also: spellCheckWord()
Parameters
  • word: word to give suggestions on.
  • customDictionary (optional): dictionary to use. If true, the profile or shared dictionary will be used (depending on your settings). If omitted or false, the system dictionary (the language you have selected in settings) will be used.
Mudlet VersionAvailable in Mudlet3.18+
Example
display(spellSuggestWord("Darkwind"))

string.byte, utf8.byte

string.byte(string [, i [, j]]) or utf8.byte(string [, i [, j]])
mystring:byte([, i [, j]])
Returns the internal numerical codes of the characters s[i], s[i+1], ···, s[j]. The default value for i is 1; the default value for j is i.
Note that numerical codes are not necessarily portable across platforms.
string.byte() works with English text only, use utf8.byte() for the international version.
See also: string.char, utf8.char
Example
-- the following call will return the ASCII values of "A", "B" and "C"
a, b, c = string.byte("ABC", 1, 3)
echo(a .. " - " .. b .. " - " .. c) -- shows "65 - 66 - 67"

-- same for the international version but with the Unicode values
a, b, c = utf8.byte("дом", 1, 3)
echo(a .. " - " .. b .. " - " .. c) -- shows "1076 - 1086 - 1084"

string.char, utf8.char

string.char(···) or utf8.char(···)
Receives zero or more integers. Returns a string with length equal to the number of arguments, in which each character has the internal numerical code equal to its corresponding argument.
Note that numerical codes are not necessarily portable across platforms.
string.char() works with English text only, use utf8.char() for the international version.
See also: string.byte, utf8.byte
Example
-- the following call will return the string "ABC" corresponding to the ASCII values 65, 66, 67
mystring = string.char(65, 66, 67)

-- same for the infernational version which will return text "дом" for the Unicode values 1076, 1086, 1084
mystring = utf8.char(1076,1086,1084)
print(mystring)

string.cut

string.cut(string, maxLen)
Cuts string to the specified maximum length.
Returns the modified string.
Parameters
  • string:
The text you wish to cut. Passed as a string.
  • maxLen:
The maximum length you wish the string to be. Passed as an integer number.

See also: utf8.remove()

Example
--The following call will return 'abc' and store it in myString
myString = string.cut("abcde", 3)
--You can easily pad string to certain length. Example below will print 'abcde     ' e.g. pad/cut string to 10 characters.
local s = "abcde"
s = string.cut(s .. "          ", 10)   -- append 10 spaces
echo("'" .. s .. "'")

string.dump

string.dump()

Converts a function into a binary string. You can use the loadstring() function later to get the function back.

string.dump() works with both English and non-English text fine.
Example
testString = string.dump(function() echo("this is a string") end)
--The following should then echo "this is a string"
loadstring(testString)()

string.enclose

string.enclose(string)
Wraps a string with [[ ]]
Returns the altered string.
Parameters
  • String:
The string to enclose. Passed as a string.
Example
--This will echo '[[Oh noes!]]' to the main window
echo("'" .. string.enclose("Oh noes!") .. "'")

string.ends

string.ends(String, Suffix)
Test if string is ending with specified suffix.
Returns true or false.
See also: string.starts
Parameters
  • String:
The string to test. Passed as a string.
  • Suffix:
The suffix to test for. Passed as a string.
Example
--This will test if the incoming line ends with "in bed" and if not will add it to the end.
if not string.ends(line, "in bed") then
  echo("in bed\n")
end

string.find, utf8.find

string.find(text, pattern [, init [, plain]]) or utf8.find
Looks for the first match of pattern in the string text. If it finds a match, then find returns the indices of text where this occurrence starts and ends; otherwise, it returns nil. A third, optional numerical argument init specifies where to start the search; its default value is 1 and can be negative. A value of true as a fourth, optional argument plain turns off the pattern matching facilities, so the function does a plain "find substring" operation, with no characters in pattern being considered "magic". Note that if plain is given, then init must be given as well.

If the pattern has captures, then in a successful match the captured values are also returned, after the two indices.

string.find() works with English text only, use utf8.find() for the international version.
Example
-- check if the word appears in a variable
if string.find(matches[2], "rabbit") then
  echo("Found a rabbit!\n")
end

-- the following example will print: "3, 4"
local start, stop = string.find("This is a test.", "is")
if start then
   print(start .. ", " .. stop)
end
-- note that here "is" is being found at the end of the word "This", rather than the expected second word

-- to make it match the word on its own, prefix %f[%a] and suffix %f[%A]
if string.find("This is a test", "%f[%a]is%f[%A]") then
  echo("This 'is' is the actual stand-alone word\n")
end
  • Return value:
nil or start and stop position of the first matched text, followed by any captured text.

string.findPattern

string.findPattern(text, pattern)
Return first matching substring or nil.
Parameters
  • text:
The text you are searching the pattern for.
  • pattern:
The pattern you are trying to find in the text.
Example

Following example will print: "I did find: Troll" string.

local match = string.findPattern("Troll is here!", "Troll")
if match then
   echo("I did find: " .. match)
end
This example will find substring regardless of case.
local match = string.findPattern("Troll is here!", string.genNocasePattern("troll"))
if match then
    echo("I did find: " .. match)
end
  • Return value:
nil or first matching substring

See also: string.genNocasePattern()

string.format

string.format(formatstring,...)
Returns a formatted version of its variable number of arguments following the description given in its first argument (which must be a string). The format string follows the same rules as the printf family of standard C functions. The only differences are that the options/modifiers *, l, L, n, p, and h are not supported and that there is an extra option, q. The q option formats a string in a form suitable to be safely read back by the Lua interpreter: the string is written between double quotes, and all double quotes, newlines, embedded zeros, and backslashes in the string are correctly escaped when written. For instance, the call
string.format('%q', 'a string with "quotes" and \n new line')

will produce the string:

     "a string with \"quotes\" and \
      new line"

The options c, d, E, e, f, g, G, i, o, u, X, and x all expect a number as argument, whereas q and s expect a string.

This function does not accept string values containing embedded zeros, except as arguments to the q option.

string.format() works fine with both English and non-English text.

Example
some_data = "MudletUser1"

-- pad data 20 characters wide to the left
display(string.format("%20s", some_data))
-- result: "         MudletUser1"

-- pad same data but instead to the the right
display(string.format("%-20s", some_data))
-- result: "MudletUser1         "

-- pad but first truncate data to 6 characters
display(string.format("%20s", string.sub(some_data, 1, 6)))
-- result: "              Mudlet"

string.genNocasePattern

string.genNocasePattern(template)
Generate case insensitive search pattern from string.
Parameters
  • template: The original string to be used as the base.
Example
echo(string.genNocasePattern("123abc"))
-- result: "123[aA][bB][cC]"

string.gfind

string.gfind()
This is an old version of what is now string.gmatch. Use string.gmatch instead.

string.gmatch, utf8.gmatch

string.gmatch(text, pattern) or utf8.gmatch
Returns an iterator function that, each time it is called, returns the next captures from pattern over string text. If pattern specifies no captures, then the whole match is produced in each call.
Example

As an example, the following loop

     s = "hello world from Lua"
     for w in string.gmatch(s, "%a+") do
       print(w)
     end

will iterate over all the words from string s, printing one per line. The next example collects all pairs key=value from the given string into a table:

     t = {}
     s = "from=world, to=Lua"
     for k, v in string.gmatch(s, "(%w+)=(%w+)") do
       t[k] = v
     end

For this function, a '^' at the start of a pattern does not work as an anchor, as this would prevent the iteration.

string.gmatch() works with English text only, use utf8.gmatch() for the international version.

string.gsub, utf8.gsub

string.gsub(text, pattern, repl [, n]) or utf8.gsub
Returns a copy of text in which all (or the first n, if given) occurrences of the pattern have been replaced by a replacement string specified by repl, which can be a string, a table, or a function. gsub also returns, as its second value, the total number of matches that occurred.
If repl is a string, then its value is used for replacement. The character % works as an escape character: any sequence in repl of the form %n, with n between 1 and 9, stands for the value of the n-th captured substring (see below). The sequence %0 stands for the whole match. The sequence %% stands for a single %.
If repl is a table, then the table is queried for every match, using the first capture as the key; if the pattern specifies no captures, then the whole match is used as the key.
If repl is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order; if the pattern specifies no captures, then the whole match is passed as a sole argument.
If the value returned by the table query or by the function call is a string or a number, then it is used as the replacement string; otherwise, if it is false or nil, then there is no replacement (that is, the original match is kept in the string).
string.gsub() works with English text only, use utf8.gsub() for the international version.
Example
     x = string.gsub("hello world", "(%w+)", "%1 %1")
     --> x="hello hello world world"
     
     x = string.gsub("hello world", "%w+", "%0 %0", 1)
     --> x="hello hello world"
     
     x = string.gsub("hello world from Lua", "(%w+)%s*(%w+)", "%2 %1")
     --> x="world hello Lua from"
     
     x = string.gsub("home = $HOME, user = $USER", "%$(%w+)", os.getenv)
     --> x="home = /home/roberto, user = roberto"
     
     x = string.gsub("4+5 = $return 4+5$", "%$(.-)%$", function (s)
           return loadstring(s)()
         end)
     --> x="4+5 = 9"
     
     local t = {name="lua", version="5.1"}
     x = string.gsub("$name-$version.tar.gz", "%$(%w+)", t)
     --> x="lua-5.1.tar.gz"

string.len, utf8.len

string.len(string) or utf8.len(string)
mystring:len()
Receives a string and returns its length. The empty string "" has length 0. Embedded zeros are counted, so "a\000bc\000" has length 5.
string.len() works with English text only, use utf8.len() for the international version.
Parameters
  • string:
The string (text) you want to find the length of.
Example
-- prints 5 for the 5 letters in our word
print(string.len("hello"))

-- international version
print(utf8.len("слово"))

string.lower, utf8.lower

string.lower(string) or utf8.lower(string)
mystring:lower()
Receives a string and returns a copy of this string with all uppercase letters changed to lowercase. All other characters are left unchanged. The definition of what an uppercase letter is depends on the current locale.
string.lower() works with English text only, use utf8.lower() for the international version.
See also: string.upper, utf8.upper
Example
-- prints an all-lowercase version
print(string.lower("No way! This is AWESOME!"))

-- international version
print(utf8.lower("Класс! Ето ОТЛИЧНО!"))

string.match, utf8.match

string.match(text, pattern [, init]) or utf8.match()
Looks for the first match of pattern in the string text. If it finds one, then match returns the captures from the pattern; otherwise it returns nil. If pattern specifies no captures, then the whole match is returned. A third, optional numerical argument init specifies where to start the search; its default value is 1 and can be negative.
string.match() works with English text only, use utf8.match() for the international version.
Example
-- match some numbers
local age = string.match("I am 100 years old.", "%d+"))
echo("Wow, " .. age .. " years old.")

string.patternEscape, utf8.patternEscape

escapedString = string.patternEscape(str) or escapedString = utf8.patternEscape(str)
Returns a version of str with all Lua pattern characters escaped to ensure string.match/find/etc look for the original str.
See also
string.trim(), string.genNocasePattern()
Mudlet VersionAvailable in Mudlet4.15+
Parameters
  • str:
The string to escape lua pattern characters in.
Returns
  • The string with all special Lua pattern characters escaped.
Example
-- searching for a url inside of a string. 
local helpString = [[
This feature can be accessed by going to https://some-url.com/athing.html?param=value and
retrieving the result!
]]
local url = "https://some-url.com/"
display(helpString:find(url))
-- nil
display(helpString:find(string.patternEscape(url)))
-- 42
-- 62
display(url:patternEscape())
-- "https://some%-url%.com/"

string.rep

string.rep(String, n)
mystring:rep(n)
Returns a string that is the concatenation of n copies of the string String.
string.rep() works with both English and non-English text fine.
Example
-- repeat * 10 times
display(string.rep("*", 10))
-- results in:
**********

-- do the same thing, but this time calling from a variable
s = "*"
display(s:rep(10))
-- results in:
**********

string.reverse, utf8.reverse

string.reverse(string) or utf8.reverse(string)
mystring:reverse()
Returns a string that is the string string reversed.
string.reverse() works with English text only, use utf8.reverse() for the international version.
Parameters
  • string:
The string to reverse. Passed as a string.
Example
mystring = "Hello from Lua"
echo(mystring:reverse()) -- displays 'auL morf olleH'

-- international version.
mystring = "Привет от Луа!"
echo(utf8.reverse(mystring)) -- displays '!ауЛ то тевирП', which probably looks the same to you

string.split

string.split(string, delimiter)
myString:split(delimiter)
Splits a string into a table by the given delimiter. Can be called against a string (or variable holding a string) using the second form above.
Returns a table containing the split sections of the string.
Parameters
  • string:
The string to split. Parameter is not needed if using second form of the syntax above. Passed as a string.
  • delimiter:
The delimiter to use when splitting the string. Passed as a string, and allows for Lua pattern types. Use % to escape here (and %% to escape a stand-alone %).
Version Information

Note Note: as of Mudlet 4.7+, delimiter will default to " " if not provided.

Note Note: as of Mudlet 4.7+, using "" (empty string) for the delimiter will return the string as a table of characters. IE string.split("This","") will return as {"T", "h", "i", "s"}. Prior to 4.7 using empty string as the delimiter would error after hanging temporarily.

Example
-- This will split the string by ", " delimiter and print the resulting table to the main window.
names = "Alice, Bob, Peter"
name_table = string.split(names, ", ")
display(name_table)

--The alternate method
names = "Alice, Bob, Peter"
name_table = names:split(", ")
display(name_table)
Either method above will print out:
table {
1: 'Alice'
2: 'Bob'
3: 'Peter'
}

string.starts

string.starts(string, prefix)
Test if string is starting with specified prefix.
Returns true or false
See also: string.ends
Parameters
  • string:
The string to test. Passed as a string.
  • prefix:
The prefix to test for. Passed as a string.
Example
--The following will see if the line begins with "You" and if so will print a statement at the end of the line
if string.starts(line, "You") then
  echo("====oh you====\n")
end

string.sub, utf8.sub

string.sub(text, i [, j]) or utf8.sub()
Returns the substring of text that starts at i and continues until j; i and j can be negative. If j is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call string.sub(text,1,j) returns a prefix of text with length j, and string.sub(text, -i) returns a suffix of text with length i.
string.sub() works with English text only, use utf8.sub() for the international version.
Example
local sub = string.sub("Twinkle, twinkle, little star.", 19)  -- returns: little star.
echo(sub)

sub = string.sub("Twinkle, twinkle, little star.", 10, 16)  -- returns: twinkle
echo(sub)

string.title

string.title(string)
mystring:title()
Capitalizes the first character in a string.
Returns the altered string.
Parameters
  • string:
The string to modify. Not needed if you use the second form of the syntax above.
Example
--Variable testname is now Anna.
testname = string.title("anna")
--Example will set test to "Bob".
test = "bob"
test = test:title()

string.trim

string.trim(string)
Trims string, removing all 'extra' white space at the beginning and end of the text.
Returns the altered string.
Parameters
  • string:
The string to trim. Passed as a string.
Example
--This will print 'Troll is here!', without the extra spaces.
local str = string.trim("  Troll is here!  ")
echo("'" .. str .. "'")

string.upper, utf8.upper

string.upper(string) or utf8.upper(string)
mystring:upper()
Receives a string and returns a copy of this string with all lowercase letters changed to uppercase. All other characters are left unchanged. The definition of what a lowercase letter is depends on the current locale.
string.upper() works with English text only, use utf8.upper() for the international version.
See also: string.lower, utf8.lower
Parameters
  • string:
The string you want to change to uppercase
Example
-- displays 'RUN BOB RUN'
print(string.upper("run bob run"))

-- displays 'ДАВАЙ ДАВАЙ!'
print(utf8.upper("давай давай!"))

utf8.charpos

utf8.charpos(string[[, charpos], offset])
Converts UTF-8 position to byte offset, returns the character position and code point. If only offset is given, returns byte offset of this UTF-8 char index. If charpos and offset is given, a new charpos will be calculated by adding/subtracting UTF-8 char offset to current charpos. In all cases, it return a new char position, and code point (a number) at this position.
Parameters
  • string:
The input string to work on.
  • charpos:
(optional) character position to work on.
  • offset:
(optional) offset (as a number) to work on.

utf8.escape

utf8.escape(string)
Escape a string to UTF-8 format string. It support several escape formats:

%ddd - which ddd is a decimal number at any length:

      change Unicode code point to UTF-8 format.

%{ddd} - same as %nnn but has bracket around. %uddd - same as %ddd, u stands Unicode %u{ddd} - same as %{ddd} %xhhh - hexadigit version of %ddd %x{hhh} same as %xhhh. %? - '?' stands for any other character: escape this character.

Parameters
  • string:
The string you want to escape
Example
local u = utf8.escape
print(u"%123%u123%{123}%u{123}%xABC%x{ABC}")
print(u"%%123%?%d%%u")

utf8.fold

utf8.fold(string)
Returns the lowercase version of the string for use in case-insensitive comparisons. If string is a number, it's treated as a code point and the converted code point is returned (as a number).
Parameters
  • string:
The string to lowercase.
Example
print(utf8.fold("ПРИВЕТ")) -- 'привет'
print(utf8.fold("Привет")) -- 'привет'

utf8.insert

utf8.insert(string[, idx], substring)
Inserts the substring into the given string. If idx is given, inserts substring before the character at this index, otherwise the substring will append onto the end of string. idx can be negative.
Parameters
  • string:
The input string to work on.
  • idx:
(optional) character position to insert the string at.
  • substring:
text to insert into the substring.
Example
-- inserts letter я before the 2nd letter and prints 'мясо'
print(utf8.insert("мсо", 2, "я"))

utf8.ncasecmp

utf8.ncasecmp(a, b)
Compares a and b without case. Return -1 means a < b, 0 means a == b and 1 means a > b.
Parameters
  • a:
String to compare.
  • b:
String to compare against.

utf8.next

utf8.next(string[, charpos[, offset]])
Iterates though the UTF-8 string.
Parameters
  • string:
The input string to work on.
  • charpos:
(optional) character position to work on.
  • offset:
(optional) offset (as a number) to work on.
Example
-- prints location and code point of every letter
for pos, code in utf8.next, "тут есть текст" do
   print(pos, code)
end

utf8.remove

utf8.remove(string[, start[, stop]])
Removes characters from the given string. Deletes characters from the given start to the end of the string. If stop is given, deletes characters from start to stop (including start and stop). start and stop can be negative.
Parameters
  • string:
The input string to work on.
  • start:
position to start deleting characters from.
  • stop:
(optional) posititon to stop deleting characters at.
Example
-- delete everything from the 3rd character including the character itself
print(utf8.remove("мясо", 3)) -- 'мя'

-- delete the last character, use negative to count backwards
print(utf8.remove("мясо", -1)) -- 'мяс'

-- delete everything from the 2nd to the 4th character
print(utf8.remove("вкусное", 2,4)) -- 'вное'

utf8.title

utf8.title(string)
Returns the uppercase version of the string for use in case-insensitive comparisons. If string is a number, it's treated as a code point and the converted code point is returned (as a number).
Parameters
  • string:
The string to uppercase.
Example
print(utf8.title("привет")) -- 'ПРИВЕТ'
print(utf8.title("Привет")) -- 'ПРИВЕТ'

utf8.width

utf8.width(string[, ambi_is_double[, default_width]])
Calculate the widths of the given string. If the string is a code point, return the width of this code point.
Parameters
  • string:
The input string to work on.
  • ambi_is_double:
(optional) if provided, the ambiguous width character's width is 2, otherwise it's 1.
  • default_width:
(optional) if provided, this will be the width of unprintable character, used display a non-character mark for these characters.

utf8.widthindex

utf8.widthindex(string, location[, ambi_is_double[, default_width]])
Returns the character index at the location in the given string as well as the offset and the width. This is a reverse operation of utf8.width().
Parameters
  • string:
The input string to work on.
  • location:
location to get the width of.
  • ambi_is_double:
(optional) if provided, the ambiguous width character's width is 2, otherwise it's 1.
  • default_width:
(optional) if provided, this will be the width of unprintable character, used display a non-character mark for these characters.