Area 51

This page is for the development of documentation for Lua API functions that are currently being worked on. Ideally the entries here can be created in the same format as will be eventually used in Lua Functions and its sub-sites.

Please use the Area_51/Template to add new entries in the sections below.

Links to other functions or parts in other sections (i.e. the main Wiki area) need to include the section details before the '#' character in the link identifier on the left side of the '|' divider between the identifier and the display text. e.g.

[[Manual:Mapper_Functions#getCustomLines|getCustomLines()]]

rather than:

[[#getCustomLines|getCustomLines()]]

which would refer to a link within the current (in this case Area 51) section. Note that this ought to be removed once the article is moved to the main wiki area!

The following headings reflect those present in the main Wiki area of the Lua API functions. It is suggested that new entries are added so as to maintain a sorted alphabetical order under the appropriate heading.

Basic Essential Functions

These functions are generic functions used in normal scripting. These deal with mainly everyday things, like sending stuff and echoing to the screen.

Database Functions

A collection of functions for helping deal with the database.

Date/Time Functions

A collection of functions for handling date & time.

File System Functions

A collection of functions for interacting with the file system.

Mapper Functions

A collection of functions that manipulate the mapper and its related features.

mapSymbolFontInfo, PR #4038 closed

mapSymbolFontInfo()

See also: setupMapSymbolFont()

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/4038

returns

• either a table of information about the configuration of the font used for symbols in the (2D) map, the elements are:

• fontName - a string of the family name of the font specified
• onlyUseThisFont - a boolean indicating whether glyphs from just the fontName font are to be used or if there is not a glyph for the required grapheme (character) then a glyph from the most suitable different font will be substituted instead. Should this be true and the specified font does not have the required glyph then the replacement character (typically something like �) could be used instead. Note that this may not affect the use of Color Emoji glyphs that are automatically used in some OSes but that behavior does vary across the range of operating systems that Mudlet can be run on.
• scalingFactor - a floating point number between 0.50 and 2.00 which modifies the size of the symbols somewhat though the extremes are likely to be unsatisfactory because some of the particular symbols may be too small (and be less visible at smaller zoom levels) or too large (and be clipped by the edges of the room rectangle or circle).

• or nil and an error message on failure.

As the symbol font details are stored in the (binary) map file rather than the profile then this function will not work until a map is loaded (or initialized, by activating a map window).

moveMapLabel, PR #6014 open

moveMapLabel(areaID/Name, labeID/Text, coordX/deltaX, coordY/deltaY[, coordZ/deltaZ][, absoluteNotRelativeMove])

Re-positions a map label within an area in the 2D mapper, in a similar manner as the moveRoom() function does for rooms and their custom exit lines. When moving a label to given coordinates this is the position that the top-left corner of the label will be positioned at; since the space allocated to a particular room on the map is ± 0.5 around the integer value of its x and y coordinates this means for a label which has a size of 1.0 x 1,0 (w x h) to position it centrally in the space for a single room at the coordinates (x, y, z) it should be positioned at (x - 0.5, y + 0.5, z).

See also: getMapLabels(), getMapLabel().

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/6014

Parameters

• areaID/Name:

Area ID as number or AreaName as string containing the map label.

• labelID/Text:

Label ID as number (which will be 0 or greater) or the LabelText on a text label. All labels will have a unique ID number but there may be more than one text labels with a non-empty text string; only the first matching one will be moved by this function and image labels also have no text and will match the empty string. with mo or AreaName as string containing the map label.

• coordX/deltaX:

A floating point number for the absolute coordinate to use or the relative amount to move the label in "room coordinates" along the X-axis.

• coordY/deltaY:

A floating point number for the absolute coordinate to use or the relative amount to move the label in "room coordinates" along the Y-axis.

• coordZ/deltaZ:

(Optional) A floating point number for the absolute coordinate to use or the relative amount to move the label in "room coordinates" along the Z-axis, if omitted the label is not moved in the z-axis at all.

• absoluteNotRelativeMove:

(Optional) a boolean value (defaults to false if omitted) as to whether to move the label to the absolute coordinates (true) or to move it the relative amount from its current location (false).

Returns

true on success or nil and an error message on failure, if successful it will also refresh the map display to show the result.

Example

-- move the first label in the area with the ID number of 2, three spaces to the east and four spaces to the north
moveMapLabel(0, 2, 3.0, 4.0)

-- move the first label in the area with the ID number of 2, one space to the west, note the final boolean argument is unneeded
moveMapLabel(0, 2, -1.0, 0.0, false)

-- move the second label in the area with the ID number of 2, three and a half spaces to the west, and two south **of the center of the current level it is on in the map**:
moveRoom(1, 2, -3.5, -2.0, true)

-- move the second label in the area with the ID number of 2, up three levels
moveRoom(1, 2, 0.0, 0.0, 3.0)

-- move the second label in the "Test 1" area one space to the west, note the last two arguments are unneeded
moveRoom("Test 1", 1, -1.0, 0.0, 0.0, false)

-- move the (top-left corner of the first) label with the text "Home" in the area with ID number 5 to the **center of the whole map**, note the last two arguments are required in this case:
moveRoom(5, "Home", 0.0, 0.0, 0.0, true)

-- all of the above will return the 'true'  boolean value assuming there are the indicated labels and areas

moveRoom, PR #6010 open

moveRoom(roomID, coordX/deltaX, coordY/deltaY[, coordZ/deltaZ][, absoluteNotRelativeMove])

Re-positions a room within an area, in the same manner as the "move to" context menu item for one or more rooms in the 2D mapper. Like that method this will also shift the entirety of any custom exit lines defined for the room concerned. This contrasts with the behavior of the setRoomCoordinates() which only moves the starting point of such custom exit lines so that they still emerge from the room to which they belong but otherwise remain pointing to the original place.

See also: setRoomCoordinates()

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/6010

Parameters

• roomID:

Room ID number to move.

• coordX/deltaX:

The absolute coordinate or the relative amount as a number to move the room in "room coordinates" along the X-axis.

• coordY/deltaY:

The absolute coordinate or the relative amount as a number to move the room in "room coordinates" along the Y-axis.

• coordZ/deltaZ:

(Optional) the absolute coordinate or the relative amount as a number to move the room in "room coordinates" along the Z-axis, if omitted the room is not moved in the z-axis at all.

• absoluteNotRelativeMove:

(Optional) a boolean value (defaults to false if omitted) as to whether to move the room to the absolute coordinates (true) or the relative amount from its current location (false).

Returns

true on success or nil and an error message on failure, if successful it will also refresh the map display to show the result.

Example

-- move the first room one space to the east and two spaces to the north
moveRoom(1, 1, 2)

-- move the first room one space to the west, note the final boolean argument is unneeded
moveRoom(1, -1, 0, false)

-- move the first room three spaces to the west, and two south **of the center of the current level it is on in the map**:
moveRoom(1, -3, -2, true)

-- move the second room up three levels
moveRoom(2, 0, 0, 3)

-- move the second room one space to the west, note the last two arguments are unneeded
moveRoom(2, -1, 0, 0, false)

-- move the second room to the **center of the whole map**, note the last two arguments are required in this case:
moveRoom(2, 0, 0, 0, true)

-- all of the above will return the 'true'  boolean value assuming there are rooms with 1 and 2 as ID numbers

setupMapSymbolFont, PR #4038 closed

setupMapSymbolFont(fontName[, onlyUseThisFont[, scalingFactor]])

configures the font used for symbols in the (2D) map.

See also: mapSymbolFontInfo()

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/4038

Parameters

• fontName one of:

• - a string that is the family name of the font to use;
• - the empty string "" to reset to the default {which is "Bitstream Vera Sans Mono"};
• - a Lua nil as a placeholder to not change this parameter but still allow a following one to be modified.

• onlyUseThisFont (optional) one of:

• - a Lua boolean true to require Mudlet to use graphemes (character) only from the selected font. Should a requested grapheme not be included in the selected font then the font replacement character (�) might be used instead; note that under some circumstances it is possible that the OS (or Mudlet) provided color Emoji Font may still be used but that cannot be guaranteed across all OS platforms that Mudlet might be run on;
• - a Lua boolean false to allow Mudlet to get a different glyph for a particular grapheme from the most suitable other font found in the system should there not be a glyph for it in the requested font. This is the default unless previously changed by this function or by the corresponding checkbox in the Profile Preferences dialogue for the profile concerned;
• - a Lua nil as a placeholder to not change this parameter but still allow the following one to be modified.

• scalingFactor (optional): a floating point value in the range 0.5 to 2.0 (default 1.0) that can be used to tweak the rectangular space that each different room symbol is scaled to fit inside; this might be useful should the range of characters used to make the room symbols be consistently under- or over-sized.

Returns

• true on success
• nil and an error message on failure. As the symbol font details are stored in the (binary) map file rather than the profile then this function will not work until a map is loaded (or initialised, by activating a map window).

Miscellaneous Functions

Miscellaneous functions.

createVideoPlayer, PR #6439

createVideoPlayer([name of userwindow], x, y, width, height)

Creates a miniconsole window for the video player to render in, the with the given dimensions. One can only create one video player at a time (currently), and it is not currently possible to have a label on or under the video player - otherwise, clicks won't register.

Note: A video player may also be created through use of the Mud Client Media Protocol, the playVideoFile() API command, or adding a Geyser.VideoPlayer object to ones user interface such as the example below.

Note: The Main Toolbar will show a Video button to hide/show the video player, which is located in a userwindow generated through createVideoPlayer, embedded in a user interface, or a dock-able widget (that can be floated free to anywhere on the Desktop, it can be resized and does not have to even reside on the same monitor should there be multiple screens in your system). Further clicks on the Video button will toggle between showing and hiding the map whether it was created using the createVideo function or as a dock-able widget.

See also: loadSoundFile(), loadMusicFile(), loadVideoFile(), playSoundFile(), playMusicFile(), playVideoFile(), stopSounds(), stopMusic(), stopVideos(), purgeMediaCache(), Mud Client Media Protocol

Available in Mudlet4.??+

Example

-- Create a 300x300 video player in the top-left corner of Mudlet
createVideoPlayer(0,0,300,300)

-- Alternative examples using Geyser.VideoPlayer
GUI.VideoPlayer = GUI.VideoPlayer or Geyser.VideoPlayer:new({name="GUI.VideoPlayer", x = 0, y = 0, width = "25%", height = "25%"})
 
GUI.VideoPlayer = GUI.VideoPlayer or Geyser.VideoPlayer:new({
  name = "GUI.VideoPlayer",
  x = "70%", y = 0, -- edit here if you want to move it
  width = "30%", height = "50%"
}, GUI.Right)

loadVideoFile, PR #6439

loadVideoFile(settings table) or loadVideoFile(name, [url])

Loads video files from the Internet or the local file system to the "media" folder of the profile for later use with playVideoFile() and stopVideos(). Although files could be loaded or streamed directly at playing time from playVideoFile(), loadVideoFile() provides the advantage of loading files in advance.

Note: Video files consume drive space on your device. Consider using the streaming feature of playVideoFile() for large files.

Required	Key	Value	Purpose
Yes	name	<file name>	Name of the media file. May contain directory information (i.e. weather/maelstrom.mp4). May be part of the profile (i.e. getMudletHomeDir().. "/congratulations.mp4") May be on the local device (i.e. "C:/Users/YourNameHere/Movies/nevergoingtogiveyouup.mp4")
Maybe	url	<url>	Resource location where the media file may be downloaded. Only required if file to load is not part of the profile or on the local file system.

See also: loadSoundFile(), loadMusicFile(), playSoundFile(), playMusicFile(), playVideoFile(), stopSounds(), stopMusic(), stopVideos(), createVideoPlayer(), purgeMediaCache(), Mud Client Media Protocol

Available in Mudlet4.??+

Example

---- Table Parameter Syntax ----

-- Download from the Internet
loadVideoFile({
    name = "TextInMotion-VideoSample-1080p.mp4"
    , url = "https://d2qguwbxlx1sbt.cloudfront.net/"
})

-- OR download from the profile
loadVideoFile({name = getMudletHomeDir().. "/TextInMotion-VideoSample-1080p.mp4"})

-- OR download from the local file system
loadVideoFile({name = "C:/Users/Tamarindo/Movies/TextInMotion-VideoSample-1080p.mp4"})

---- Ordered Parameter Syntax of loadVideoFile(name[, url]) ----

-- Download from the Internet
loadVideoFile(
    "TextInMotion-VideoSample-1080p.mp4"
    , "https://d2qguwbxlx1sbt.cloudfront.net/"
)

-- OR download from the profile
loadVideoFile(getMudletHomeDir().. "/TextInMotion-VideoSample-1080p.mp4")

-- OR download from the local file system
loadVideoFile("C:/Users/Tamarindo/Movies/TextInMotion-VideoSample-1080p.mp4")

playVideoFile, PR #6439

playVideoFile(settings table)

Plays video files from the Internet or the local file system for later use with stopMusic(). Video files may be downloaded to the device and played, or streamed from the Internet when the value of the stream parameter is true.

Required	Key	Value	Default	Purpose
Yes	name	<file name>		Name of the media file. May contain directory information (i.e. weather/maelstrom.mp4). May be part of the profile (i.e. getMudletHomeDir().. "/cow.mp4") May be on the local device (i.e. "C:/Users/YourNameHere/Documents/nevergoingtogiveyouup.mp4") Wildcards * and ? may be used within the name to randomize media files selection.
No	volume	1 to 100	50	Relative to the volume set on the player's client.
No	fadein	<msec>		Volume increases, or fades in, ranged across a linear pattern from one to the volume set with the "volume" key. Start position: Start of media. End position: Start of media plus the number of milliseconds (msec) specified. 1000 milliseconds = 1 second.
No	fadeout	<msec>		Volume decreases, or fades out, ranged across a linear pattern from the volume set with the "volume" key to one. Start position: End of the media minus the number of milliseconds (msec) specified. End position: End of the media. 1000 milliseconds = 1 second.
No	start	<msec>	0	Begin play at the specified position in milliseconds.
No	loops	-1, or >= 1	1	Number of iterations that the media plays. A value of -1 allows the media to loop indefinitely.
No	key	<key>		Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>		Helps categorize media.
No	continue	true or false	true	Continues playing matching new video files when true. Restarts matching new video files when false.
Maybe	url	<url>		Resource location where the media file may be downloaded. Only required if the file is to be downloaded remotely or for streaming from the Internet.
Maybe	stream	true or false	false	Streams files from the Internet when true. Download files when false (default). Used in combination with the `url` key.

See also: loadSoundFile(), loadMusicFile(), loadVideoFile(), playSoundFile(), playMusicFile(), stopSounds(), stopMusic(), stopVideos(), createVideoPlayer(), purgeMediaCache(), Mud Client Media Protocol

Available in Mudlet4.??+

Example

---- Table Parameter Syntax ----

-- Stream a video file from the Internet and play it.
playVideoFile({
    name = "TextInMotion-VideoSample-1080p.mp4"
    , url = "https://d2qguwbxlx1sbt.cloudfront.net/"
    , stream = true
})

-- Play a video file from the Internet, storing it in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media) so you don't need to download it over and over.  You could add ", stream = false" below, but that is the default and is not needed.

playVideoFile({
    name = "TextInMotion-VideoSample-1080p.mp4"
    , url = "https://d2qguwbxlx1sbt.cloudfront.net/"
})

-- Play a video file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playVideoFile({
    name = "TextInMotion-VideoSample-1080p.mp4"
})

-- OR copy once from the game's profile, and play a video file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playVideoFile({
    name = getMudletHomeDir().. "/TextInMotion-VideoSample-1080p.mp4"
    , volume = 75
})

-- OR copy once from the local file system, and play a video file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playVideoFile({
    name = "C:/Users/Tamarindo/Movies/TextInMotion-VideoSample-1080p.mp4"
    , volume = 75
})

-- OR download once from the Internet, and play a video stored in the profile's media directory
---- [fadein] and increase the volume from 1 at the start position to default volume up until the position of 10 seconds
---- [fadeout] and decrease the volume from default volume to one, 15 seconds from the end of the video
---- [start] 5 seconds after position 0 (fadein scales its volume increase over a shorter duration, too)
---- [key] reference of "text" for stopping this unique video later
---- [tag] reference of "ambience" to stop any video later with the same tag
---- [continue] playing this video if another request for the same video comes in (false restarts it) 
---- [url] resource location where the file may be accessed on the Internet
---- [stream] download once from the Internet if the video does not exist in the profile's media directory when false (true streams from the Internet and will not download to the device) 
playVideoFile({
    name = "TextInMotion-VideoSample-1080p.mp4"
    , volume = nil -- nil lines are optional, no need to use
    , fadein = 10000
    , fadeout = 15000
    , start = 5000
    , loops = nil -- nil lines are optional, no need to use
    , key = "text"
    , tag = "ambience"
    , continue = true
    , url = "https://d2qguwbxlx1sbt.cloudfront.net/"
    , stream = false
})

---- Ordered Parameter Syntax of playVideoFile(name[,volume][,fadein][,fadeout][,loops][,key][,tag][,continue][,url][,stream]) ----

-- Stream a video file from the Internet and play it.
playVideoFile(
    "TextInMotion-VideoSample-1080p.mp4"
    , nil -- volume
    , nil -- fadein
    , nil -- fadeout
    , nil -- start
    , nil -- loops
    , nil -- key
    , nil -- tag
    , true -- continue
    , "https://d2qguwbxlx1sbt.cloudfront.net/" -- url
    , false -- stream
)

-- Play a video file from the Internet, storing it in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media) so you don't need to download it over and over.
playVideoFile(
    "TextInMotion-VideoSample-1080p.mp4"
    , nil -- volume
    , nil -- fadein
    , nil -- fadeout
    , nil -- start
    , nil -- loops
    , nil -- key
    , nil -- tag
    , true -- continue
    , "https://d2qguwbxlx1sbt.cloudfront.net/" -- url
    , false -- stream
)

-- Play a video file stored in the profile's media directory (i.e. /Users/Tamarindo/mudlet-data/profiles/StickMUD/media)
playVideoFile(
    "TextInMotion-VideoSample-1080p.mp4"  -- name
)

-- OR copy once from the game's profile, and play a video file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playVideoFile(
    getMudletHomeDir().. "/TextInMotion-VideoSample-1080p.mp4" -- name
    , 75 -- volume
)

-- OR copy once from the local file system, and play a video file stored in the profile's media directory
---- [volume] of 75 (1 to 100)
playVideoFile(
    "C:/Users/Tamarindo/Documents/TextInMotion-VideoSample-1080p.mp4" -- name
    , 75 -- volume
)

-- OR download once from the Internet, and play a video stored in the profile's media directory
---- [fadein] and increase the volume from 1 at the start position to default volume up until the position of 10 seconds
---- [fadeout] and decrease the volume from default volume to one, 15 seconds from the end of the video
---- [start] 5 seconds after position 0 (fadein scales its volume increase over a shorter duration, too)
---- [key] reference of "text" for stopping this unique video later
---- [tag] reference of "ambience" to stop any video later with the same tag
---- [continue] playing this video if another request for the same video comes in (false restarts it) 
---- [url] resource location where the file may be accessed on the Internet
---- [stream] download once from the Internet if the video does not exist in the profile's media directory when false (true streams from the Internet and will not download to the device) 
playVideoFile(
    "TextInMotion-VideoSample-1080p.mp4" -- name
    , nil -- volume
    , 10000 -- fadein
    , 15000 -- fadeout
    , 5000 -- start
    , nil -- loops
    , "text" -- key
    , "ambience" -- tag
    , true -- continue
    , "https://d2qguwbxlx1sbt.cloudfront.net/" -- url
    , false -- stream
)

stopVideos, PR #6439

stopVideos(settings table)

Stop all videos (no filter), or videos that meet a combination of filters (name, key, and tag) intended to be paired with playVideoFile().

Required	Key	Value	Purpose
No	name	<file name>	Name of the media file.
No	key	<key>	Uniquely identifies media files with a "key" that is bound to their "name" or "url". Halts the play of current media files with the same "key" that have a different "name" or "url" while this media plays.
No	tag	<tag>	Helps categorize media.

See also: loadSoundFile(), loadMusicFile(), loadVideoFile(), playSoundFile(), playMusicFile(), playVideoFile(), stopSounds(), stopMusic(), createVideoPlayer(), purgeMediaCache(), Mud Client Media Protocol

Available in Mudlet4.??+

Example

---- Table Parameter Syntax ----

-- Stop all playing video files for this profile associated with the API
stopVideos()

-- Stop playing the text mp4 by name
stopVideos({name = "TextInMotion-VideoSample-1080p.mp4"})

-- Stop playing the unique sound identified as "text"
stopVideos({
    name = nil  -- nil lines are optional, no need to use
    , key = "text" -- key
    , tag = nil  -- nil lines are optional, no need to use
})

---- Ordered Parameter Syntax of stopVideos([name][,key][,tag]) ----

-- Stop all playing video files for this profile associated with the API
stopVideos()

-- Stop playing the text mp4 by name
stopVideos("TextInMotion-VideoSample-1080p.mp4")

-- Stop playing the unique sound identified as "text"
stopVideos(
    nil -- name
    , "text" -- key
    , nil -- tag
)

getCustomLoginTextId, PR #3952 open

getCustomLoginTextId()

Returns the Id number of the custom login text setting from the profile's preferences. Returns 0 if the option is disabled or a number greater than that for the item in the table; note it is possible if using an old saved profile in the future that the number might be higher than expected. As a design policy decision it is not permitted for a script to change the setting, this function is intended to allow a script or package to check that the setting is what it expects.

Introduced along with four other functions to enable game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function, a replacement for which is shown below.

See also: getCharacterName(), sendCharacterName(), sendCustomLoginText(), sendPassword().

Note: Not available yet. See https://github.com/Mudlet/Mudlet/pull/3952

Only one custom login text has been defined initially:

Predefined custom login texts

Id	Custom text	Introduced in Mudlet version
1	"connect {character name} {password}"	TBD

The addition of further texts would be subject to negotiation with the Mudlet Makers.

Example

-- A replacement for the default function placed into LuaGlobal.lua to reproduce the previous behavior of the Mudlet application:
function doLogin()
  if getCustomLoginTextId() ~= 1 then
    -- We need this particular option but it is not permitted for a script to change the setting, it can only check what it is
    echo("\nUnable to login - please select the 'connect {character name} {password}` custom login option in the profile preferences.\n")
  else
    tempTime(2.0, [[sendCustomLoginText()]], 1)
  end
end

sendCharacterName, PR #3952 open

sendCharacterName()

Sends the name entered into the "Character name" field on the Connection Preferences form directly to the game server. Returns true unless there is nothing set in that entry in which case a nil and an error message will be returned instead.

Introduced along with four other functions to enable game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function that may be replaced for more sophisticated requirements.

See also: getCharacterName(), sendCharacterPassword(), sendCustomLoginText(), getCustomLoginTextId().

Note: Not available yet. See https://github.com/Mudlet/Mudlet/pull/3952

sendCharacterPassword, PR #3952 open

sendCharacterPassword()

Sends the password entered into the "Password" field on the Connection Preferences form directly to the game server. Returns true unless there is nothing set in that entry or it is too long after (or before) a connection was successfully made in which case a nil and an error message will be returned instead.

Introduced along with four other functions to enable game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function, reproduced below, that may be replaced for more sophisticated requirements.

See also: getCharacterName(), sendCustomLoginText(), getCustomLoginTextId(), sendCharacterName().

Note: Not available yet. See https://github.com/Mudlet/Mudlet/pull/3952

Example

-- The default function placed into LuaGlobal.lua to reproduce the previous behavior of the Mudlet application:
function doLogin()
  if getCharacterName() ~= "" then
    tempTime(2.0, [[sendCharacterName()]], 1)
    tempTime(3.0, [[sendCharacterPassword()]], 1)
  end
end

sendCustomLoginText, PR #3952 open

sendCustomLoginText()

Sends the custom login text (which does NOT depend on the user's choice of GUI language) selected in the preferences for this profile. The {password} (and {character name} if present) fields will be replaced with the values entered into the "Password" and "Character name" fields on the Connection Preferences form and then sent directly to the game server. Returns true unless there is nothing set in either of those entries (though only if required for the character name) or it is too long after (or before) a connection was successfully made or if the custom login feature is disabled, in which case a nil and an error message will be returned instead.

Introduced along with four other functions to enable game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function, a replacement for which is shown below.

See also: getCharacterName(), sendCharacterName(), sendPassword(), getCustomLoginTextId().

Note: Not available yet. See https://github.com/Mudlet/Mudlet/pull/3952

Only one custom login text has been defined initially:

Predefined custom login texts

Id	Custom text	Introduced in Mudlet version
1	"connect {character name} {password}"	TBD

The addition of further texts would be subject to negotiation with the Mudlet Makers.

Example

-- A replacement for the default function placed into LuaGlobal.lua to reproduce the previous behavior of the Mudlet application:
function doLogin()
  if getCustomLoginTextId() ~= 1 then
    -- We need this particular option but it is not permitted for a script to change the setting, it can only check what it is
    echo("\nUnable to login - please select the 'connect {character name} {password}` custom login option in the profile preferences.\n")
  else
    tempTime(2.0, [[sendCustomLoginText()]], 1)
  end
end

Mudlet Object Functions

A collection of functions that manipulate Mudlet's scripting objects - triggers, aliases, and so forth.

Networking Functions

A collection of functions for managing networking.

feedTelnet added in PR #7066 (Open)

feedTelnet(data)

Sends given binary data with some predefined special tokens converted to byte values, to the internal telnet engine, as if it had been received from the game. This is primarily to enable testing when new Telnet sub-options/protocols are being developed. The data has to be injected into the system nearer to the point where the Game Server's data starts out than feedTriggers() and unlike the latter the data is not subject to any encoding so as to match the current profile's setting (which normally happens with feedTriggers()). Furthermore - to prevent this function from putting the telnet engine into a state which could damage the processing of real game data it will refuse to work unless the Profile is completely disconnected from the game server.

See also

feedTriggers(), sendSocket()

Available in Mudlettbd+

Note: This is not really intended for end-user's but might be useful in some circumstances.

Parameters

• data

String containing the bytes to send to the internal telnet engine as if it had come from the Game Server, it can containing some tokens listed below that are to be converted to bytes as well.

Returns

• Boolean true if the data string was sent to the internal telnet engine. nil and an error message otherwise, specifically the case when there is some traces of a connection or a complete connection to the socket that passes the data to and from the game server. Additionally, if the data is an empty string "" a second return value will be provided as an integer number representing a version for the table of tokens - which will be incremented each time a change is made to that table so that which tokens are valid can be determined. Note that unrecognised tokens should be passed through as is and not get replaced.

Token value table

Token	Byte	Version	Notes
<00>	\0x00	1	0 dec.
<O_BINARY>	\0x00	1	Telnet option: Binary
<NUL>	\0x00	1	ASCII control character: NULL
<01>	\x01	1	1 dec.
<O_ECHO>	\x01	1	Telnet option: Echo
<SOH>	\x01	1	ASCII control character: Start of Heading
<02>	\x02	1	2 dec. Telnet option: Reconnect
<STX>	\x02	1	ASCII control character: Start of Text
<03>	\x03	1	3 dec.
<O_SGA>	\x03	1	Telnet option: Suppress Go Ahead
<ETX>	\x03	1	ASCII control character: End of Text
<04>	\x04	1	Telnet option: Approx Message Size Negotiation
<EOT>	\x04	1	ASCII control character: End of Transmission
<05>	\x05	1
<O_STATUS>	\x05	1
<ENQ>	\x05	1	ASCII control character: Enquiry
<06>	\x06	1	Telnet option: Timing Mark
<ACK>	\x06	1	ASCII control character: Acknowledge
<07>	\x07	1	Telnet option: Remote Controlled Trans and Echo
<BELL>	\x07	1	ASCII control character: Bell
<08>	\x08	1	Telnet option: Output Line Width
<BS>	\x08	1
<09>	\x09	1	Telnet option: Output Page Size
<HTAB>	\x09	1	ASCII control character: Horizontal Tab
<0A>	\x0a	1	Telnet option: Output Carriage-Return Disposition
<LF>	\x0a	1	ASCII control character: Line-Feed
<0B>	\x0b	1	Telnet option: Output Horizontal Tab Stops
<VTAB>	\x0b	1	ASCII control character: Vertical Tab
<0C>	\x0c	1	Telnet option: Output Horizontal Tab Disposition
<FF>	\x0c	1	ASCII control character: Form-Feed
<0D>	\x0d	1	Telnet option: Output Form-feed Disposition
<CR>	\x0d	1	ASCII control character: Carriage-Return
<0E>	\x0e	1	Telnet option: Output Vertical Tab Stops
<SO>	\x0e	1	ASCII control character: Shift-Out
<0F>	\x0f	1	Telnet option: Output Vertical Tab Disposition
<SI>	\x0f	1	ASCII control character: Shift-In
<10>	\x10	1	Telnet option: Output Linefeed Disposition
<DLE>	\x10	1	ASCII control character: Data Link Escape
<11>	\x11	1	Telnet option: Extended ASCII
<DC1>	\x11	1	ASCII control character: Device Control 1
<12>	\x12	1	Telnet option: Logout
<DC2"	\x12	1	ASCII control character: Device Control 2
<13>	\x13	1	Telnet option: Byte Macro
<DC3>	\x13	1	ASCII control character: Device Control 3
<14>	\x14	1	Telnet option: Data Entry Terminal
<DC4>	\x14	1	ASCII control character: Device Control 4
<15>	\x15	1	Telnet option: SUPDUP
<NAK>	\x15	1	ASCII control character: Negative Acknowledge
<16>	\x16	1	Telnet option: SUPDUP Output
<SYN>	\x16	1	ASCII control character: Synchronous Idle
<17>	\x17	1	Telnet option: Send location
<ETB>	\x17	1	ASCII control character: End of Transmission Block
<18>	\x18	1
<O_TERM>	\x18	1	Telnet option: Terminal Type
<CAN>	\x18	1	ASCII control character: Cancel
<19>	\x19	1
<O_EOR>	\x19	1	Telnet option: End-of-Record
<EM>	\x19	1	ASCII control character: End of Medium
<1A>	\x1a	1	Telnet option: TACACS User Identification
<SUB>	\x1a	1	ASCII control character: Substitute
<1B>	\x1b	1	Telnet option: Output Marking
<ESC>	\x1b	1	ASCII control character: Escape
<1C>	\x1c	1	Telnet option: Terminal Location Number
<FS>	\x1c	1	ASCII control character: File Separator
<1D>	\x1d	1	Telnet option: Telnet 3270 Regime
<GS>	\x1d	1	ASCII control character: Group Separator
<1E>	\x1e	1	Telnet option: X.3 PAD
<RS>	\x1e	1	ASCII control character: Record Separator
<1F>	\x1f	1
<O_NAWS>	\x1f	1	Telnet option: Negotiate About Window Size
<US>	\x1f	1	ASCII control character: Unit Separator
<SP>	\x20	1	32 dec. ASCII character: Space
<O_NENV>	\x27	1	39 dec. Telnet option: New Environment (also MNES)
<O_CHARS>	\x2a	1	42 dec. Telnet option: Character Set
<O_KERMIT>	\x2f	1	47 dec. Telnet option: Kermit
<O_MSDP>	\x45	1	69 dec. Telnet option: Mud Server Data Protocol
<O_MSSP>	\x46	1	70 dec. Telnet option: Mud Server Status Protocol
<O_MCCP>	\x55	1	85 dec
<O_MCCP2>	\x56	1	86 dec
<O_MSP>	\x5a	1	90 dec. Telnet option: Mud Sound Protocol
<O_MXP>	\x5b	1	91 dec. Telnet option: Mud eXtension Protocol
<O_ZENITH>	\x5d	1	93 dec. Telnet option: Zenith Mud Protocol
<O_AARDWULF>	\x66	1	102 dec. Telnet option: Aardwuld Data Protocol
<DEL>	\x7f	1	127 dec. ASCII control character: Delete
<O_ATCP>	\xc8	1	200 dec
<O_GMCP>	\xc9	1	201 dec
<T_EOR>	\xef	1	239 dec
<F0>	\xf0	1
<T_SE>	\xf0	1
<F1>	\xf1	1
<T_NOP>	\xf1	1
<F2>	\xf2	1
<T_DM>	\xf2	1
<F3>	\xf3	1
<T_BRK>	\xf3	1
<F4>	\xf4	1
<T_IP>	\xf4	1
<F5>	\xf5	1
<T_ABOP>	\xf5	1
<F6>	\xf6	1
<T_AYT>	\xf6	1
<F7>	\xf7	1
<T_EC>	\xf7	1
<F8>	\xf8	1
<T_EL>	\xf8	1
<F9>	\xf9	1
<T_GA>	\xf9	1
<FA>	\xfa	1
<T_SB>	\xfa	1
<FB>	\xfb	1
<T_WILL>	\xfb	1
<FC>	\xfc	1
<T_WONT>	\xfc	1
<FD>	\xfd	1
<T_DO>	\xfd	1
<FE>	\xfe	1
<T_DONT>	\xfe	1
<FF>	\xff	1
<T_IAC>	\xff'

Example

-- a comment explaining what is going on, if there is multiple functionalities (or optional parameters) the examples should start simple and progress in complexity if needed!
-- the examples should be small, but self-contained so new users can copy & paste immediately without going diving in lots other function examples first.
-- comments up top should introduce / explain what it does

local something = feedTelnet(exampleValue)
if something then
  -- do something with something (assuming there is a meaningful return value)
end

-- maybe another example for the optional second case
local somethingElse = function(exampleValue, anotherValue)

-- lastly, include an example with error handling to give an idea of good practice
local ok, err = function()
if not ok then
  debugc(f"Error: unable to do <particular thing> because {err}\n")
  return
end

Additional development notes

-- This function is still being written up.

String Functions

These functions are used to manipulate strings.

Table Functions

These functions are used to manipulate tables. Through them you can add to tables, remove values, check if a value is present in the table, check the size of a table, and more.

Text to Speech Functions

These functions are used to create sound from written words. Check out our Text-To-Speech Manual for more detail on how this all works together.

UI Functions

These functions are used to construct custom user GUIs. They deal mainly with miniconsole/label/gauge creation and manipulation as well as displaying or formatting information on the screen.

insertPopup, revised in PR #6925

insertPopup([windowName], text, {commands}, {hints}[{, tool-tips}][, useCurrentFormatElseDefault])

Creates text with a left-clickable link, and a right-click menu for more options at the end of the current line, like echo. The added text, upon being left-clicked, will do the first command in the list. Upon being right-clicked, it'll display a menu with all possible commands. The menu will be populated with hints, one for each line; if a tool-tips table is not provided the same hints will also be listed one-per-line as a tool-tip but if a matching number of tool-tips are provided they will be concatenated to provide a tool-tip when the text is hovered over by the pointer - these tool-tips can be rich-text to produce information formatted with additional content in the same manner as labels.

Parameters

• windowName:

(optional) name of the window as a string to echo to. Use either main or omit for the main window, or the miniconsole's or user-window's name otherwise.

• text:

the text string to display.

• {commands}:

a table of lua code to do, in text strings or as functions (since Mudlet 4.11), i.e. {[[send("hello")]], function() echo("hi!") end}.

• {hints}:

a table of strings which will be shown on the right-click menu (and popup if no {tool-tips} table is provided). If a particular position in both the commands and hints table are both the empty string "" but there is something in the tool-tips table, no entry for that position will be made in the context menu but the tool-tip can still display something which can include images or text.

• {tool-tips}:

(optional) a table of possibly rich-text strings which will be shown on the popup if provided.

• useCurrentFormatElseDefault:

(optional) a boolean value for using either the current formatting options (color, underline, italic and other effects) if true or the link default (blue underline) if false, if omitted the default format is used.

Note: Mudlet will distinguish between the optional tool-tips and the flag to switch between the standard link and the current text format by examining the type of the argument, as such this pair of arguments can be in either order.

Example

-- Create some text as a clickable with a popup menu, a left click will ''send "sleep"'':
insertPopup("activities to do", {function() send "sleep" end, function() send "sit" end, function() send "stand" end}, {"sleep", "sit", "stand"})

-- alternatively, put commands as text (in [[ and ]] to use quotation marks inside)
insertPopup("activities to do", {[[send "sleep"]], [[send "sit"]], [[send "stand"]]}, {"sleep", "sit", "stand"})

-- one can also provide helpful information

-- todo: an example with rich-text in the tool-tips(s)

Discord Functions

All functions to customize the information Mudlet displays in Discord's rich presence interface. For an overview on how all of these functions tie in together, see our Discord scripting overview.

Mud Client Media Protocol

All GMCP functions to send sound and music events. For an overview on how all of these functions tie in together, see our MUD Client Media Protocol scripting overview.

Events

New or revised events that Mudlet can raise to inform a profile about changes. See Mudlet-raised events for the existing ones.

sysSettingChanged, PR #7476

This event is raised when a Preferences or Mudlet setting has changed. The first argument contains the setting that was changed, further arguments detail the change.

Currently implemented sysSettingChanged events are;

• "main window font" - raised when the main window/console font has changed via API or Preferences window. Returns two additional arguments, the font family and the font size. e.g. {"main window font", "Times New Roman", 12 }

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/7476

sysMapAreaChanged, PR #6615

Raised when the area being viewed in the mapper is changed, either by the player-room being set to a new area or the user selecting a different area in the area selection combo-box in the mapper controls area. Returns two additional arguments being the areaID of the area being switched to and then the one for the area that is being left.

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/6615

sysMapWindowMousePressEvent, PR #6962

Raised when the mouse is left-clicked on the mapper window.

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/6962

sysWindowOverflowEvent, PR #6872

Raised when the content in a mini-console/user window that has been set to be non-scrolling (see: enableScrolling(...) and disableScrolling(...)) overflows - i.e. fills the visible window and overflows off the bottom. Returns two additional arguments being the window's name as a string and the number of lines that have gone past that which can be shown on the current size of the window.

Available in Mudlet ?.??+

Note: pending, not yet available. See https://github.com/Mudlet/Mudlet/pull/6872 and https://github.com/Mudlet/Mudlet/pull/6848 for the Lua API functions (that also need documenting).